Oil & Gas

Tabasco, Mexico

2 × 3,600 HP AC Land Drilling Rigs

Two 3,600 HP AC units currently in operation in Tabasco. Reported hook load capacity of 1,500,000 lbs. Estimated release upon completion of current well, subject to confirmation.

Currently in operation

Sale

Opens this opportunity's page in a new tab

United States

3,000 HP Land Drilling Rig

High-capacity used alternative for land drilling programs. Currently under technical and documentary evaluation; availability and price subject to confirmation during due diligence.

Under technical and documentary evaluation

Sale

Opens this opportunity's page in a new tab

Poly-Anionic Cellulose (PAC) — HV Grade

Poly-anionic cellulose (PAC) HV grade: high-performance viscosifier and fluid-loss control additive for fresh, salt, saturated-salt and seawater drilling-fluid systems, with better salt- and temperature-resistance than CMC. Appearance: white to pale-yellow powder or granules. Catalog technical data sheet: available. Request the applicable SDS and CoA; availability subject to confirmation. Representative family image (same photograph used across this family's references).

Availability on request — catalog technical data sheet available; SDS and CoA subject to request

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

Poly-Anionic Cellulose (PAC) — HV 95% Grade

High-purity (≥95%) grade of PAC-HV, with certified degree of substitution and the same base viscosifying and fluid-loss-control properties. Appearance: white to pale-yellow powder or granules. Catalog technical data sheet: available. Request the applicable SDS and CoA; availability subject to confirmation. Representative family image (same photograph used across this family's references).

Availability on request — catalog technical data sheet available; SDS and CoA subject to request

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

Poly-Anionic Cellulose (PAC) — LV Grade

Poly-anionic cellulose (PAC) LV grade: focused primarily on fluid-loss control with lower viscosity contribution, for the same fresh, salt, saturated-salt and seawater systems. Appearance: white to pale-yellow powder or granules. Catalog technical data sheet: available. Request the applicable SDS and CoA; availability subject to confirmation. Representative family image (same photograph used across this family's references).

Availability on request — catalog technical data sheet available; SDS and CoA subject to request

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

Poly-Anionic Cellulose (PAC) — LV 95% Grade

Low-viscosity, high-purity (≥95%) PAC grade, with certified degree of substitution. Appearance: white to pale-yellow powder or granules. Catalog technical data sheet: available. Request the applicable SDS and CoA; availability subject to confirmation. Representative family image (same photograph used across this family's references).

Availability on request — catalog technical data sheet available; SDS and CoA subject to request

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

Technical-Grade Carboxymethyl Cellulose (CMC) — HV Grade

Technical-grade carboxymethyl cellulose (CMC) HV grade: anionic polyelectrolyte used as viscosifier, stabilizer and fluid-loss-control additive in salt-water and saturated-salt-water drilling fluids. Appearance: white or near-white fibrous powder. Catalog technical data sheet: available. Request the applicable SDS and CoA; availability subject to confirmation. Representative family image (same photograph used across this family's references).

Availability on request — catalog technical data sheet available; SDS and CoA subject to request

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

Technical-Grade Carboxymethyl Cellulose (CMC) — LV Grade

Low-viscosity grade of technical CMC, focused on fluid-loss control with lower viscosity contribution; also used as a fluid-loss reducer for well cement and a thickener in acidizing and fracturing. Appearance: white or near-white fibrous powder. Catalog technical data sheet: available. Request the applicable SDS and CoA; availability subject to confirmation. Representative family image (same photograph used across this family's references).

Availability on request — catalog technical data sheet available; SDS and CoA subject to request

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

Amphoteric-Ionic Polymer Coating Agent FA367

Amphoteric-ionic polymer coating (encapsulating) agent, with good colloidal stability and temperature- and salt-resistance, applicable in fresh-water, seawater and saturated-salt-water systems. Appearance: white to light-gray granules or powder. Catalog technical data sheet: available. Request the applicable SDS and CoA; availability subject to confirmation.

Availability on request — catalog technical data sheet available; SDS and CoA subject to request

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

Potassium Polyacrylamide (KPAM)

Water-soluble anionic potassium polyacrylamide that inhibits hydration-swelling and dispersion of water-sensitive shales and clays to stabilize the wellbore. Appearance: free-flowing white or pale-yellow powder. Catalog technical data sheet: available. Request the applicable SDS and CoA; availability subject to confirmation.

Availability on request — catalog technical data sheet available; SDS and CoA subject to request

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

Drilling-Fluid Fluid-Loss Reducer Modified Humic Acid KJ-II

Graft-copolymerized humic acid, a high-temperature-resistant fluid-loss reducer for deep and ultra-deep wells. Appearance: free-flowing black powder. Catalog technical data sheet: available. Request the applicable SDS and CoA; availability subject to confirmation.

Availability on request — catalog technical data sheet available; SDS and CoA subject to request

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

High-Temperature-Resistant Anti-Caving Thinner & Fluid-Loss Reducer Multi-Branched Resin PRFF

Multi-branched resin used as a high-temperature-resistant anti-caving thinner and fluid-loss reducer, for fresh-water, salt-water and moderate salt-contamination conditions in medium-depth and complex wells. Appearance: free-flowing black or brownish-black powder. Catalog technical data sheet: available. Request the applicable SDS and CoA; availability subject to confirmation.

Availability on request — catalog technical data sheet available; SDS and CoA subject to request

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

Potassium Humate (KAHm)

High-molecular-weight aromatic hydroxy-carboxylate that inhibits shale hydration-dispersion and mud-cuttings formation, stabilizing the wellbore. Appearance: free-flowing black/brownish-black granules and powder. Catalog technical data sheet: available. Request the applicable SDS and CoA; availability subject to confirmation.

Availability on request — catalog technical data sheet available; SDS and CoA subject to request

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

Humic-Acid Propyl-Sulfonic-Acid Multi-Copolymer

Anionic graft copolymer based on humic acid, with excellent high-temperature resistance; reduces mud viscosity and gel strength with a minor change in fluid loss. Appearance: free-flowing black/brownish-black powder. Catalog technical data sheet: available. Request the applicable SDS and CoA; availability subject to confirmation.

Availability on request — catalog technical data sheet available; SDS and CoA subject to request

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

Lignite Resin (SPNH)

Lignite resin synthesized via graft copolymerization and sulfonation; used mainly for fluid-loss control with partial thinning effect, with good resistance to high temperature, salt and calcium. Appearance: dark-brown powder. Catalog technical data sheet: available. Request the applicable SDS and CoA; availability subject to confirmation.

Availability on request — catalog technical data sheet available; SDS and CoA subject to request

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

Sulfonated Phenolic Resin (SMP-II)

Sulfonated phenolic resin, a water-soluble anionic polyelectrolyte and high-temperature/salt-resistant fluid-loss reducer for deep wells, combined with sulfonated lignite and tannin. Appearance: free-flowing powder. Catalog technical data sheet: available. Request the applicable SDS and CoA; availability subject to confirmation.

Availability on request — catalog technical data sheet available; SDS and CoA subject to request

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

Solid Lubricant for Drilling Fluid (Graphite-Type) (RH-2)

Solid powder lubricant based on natural mineral and surfactant; reduces friction and torque, and prevents pipe sticking in directional and cluster wells. Appearance: black/gray-black solid. Catalog technical data sheet: available. Request the applicable SDS and CoA; availability subject to confirmation.

Availability on request — catalog technical data sheet available; SDS and CoA subject to request

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

Non-Fluorescent Lubricant for Drilling Fluid (RH-3)

Extreme-pressure liquid lubricant based on mineral/vegetable oil and surfactants; delivers strong lubrication, anti-sticking and anti-foaming performance for water-based fluids. Appearance: liquid. Catalog technical data sheet: available. Request the applicable SDS and CoA; availability subject to confirmation.

Availability on request — catalog technical data sheet available; SDS and CoA subject to request

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

Carboxymethyl Starch (CMS) — Standard Grade

Carboxymethyl starch (CMS) standard grade, with excellent resistance to saturated salt water and calcium; mitigates contamination-driven fluid-loss increase. Appearance: free-flowing white to pale-yellow powder/granules. Catalog technical data sheet: available. Request the applicable SDS and CoA; availability subject to confirmation. Representative family image (same photograph used across this family's references).

Availability on request — catalog technical data sheet available; SDS and CoA subject to request

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

Carboxymethyl Starch (CMS) — 120 °C High-Temperature-Resistant Grade

Carboxymethyl starch (CMS) high-temperature-resistant grade (120 °C), with the same excellent resistance to saturated salt water and calcium as the standard grade. Appearance: free-flowing white to pale-yellow powder/granules. Catalog technical data sheet: available. Request the applicable SDS and CoA; availability subject to confirmation. Representative family image (same photograph used across this family's references).

Availability on request — catalog technical data sheet available; SDS and CoA subject to request

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

Steel Line Pipe

Steel pipe for hydrocarbon transportation across three manufacturing technologies: SAWL/LSAW (longitudinal seam, OD 355–1422 mm, up to X100/X100M grade), SAWH/HSAW (helical seam, OD 219–3820 mm, up to X100/X100M) and HFW/ERW (high-frequency welded, OD 139.7–426 mm, up to X70). Ranges documented per technology (manufacturer's corporate brochure); not combined across technologies. This is a configurable family per project specification — the absence of a closed SKU does not mean absence of product. Request availability stating the required diameter, wall thickness, grade and coating.

Availability on request — configurable family per project specification

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

Coiled Tubing

Continuous metallic pipe documented in three manufacturer-range families: low-alloy steel (grades CT55 to CT150, OD 25.4–88.9 mm, API 5ST/5LCP/GB-T 34204), Corrosion-Resistant Alloy — CRA (same dimensional range, API 5ST/5LCP) and Coiled Line Pipe for transportation (grades X52C to X90C, API 5LCP). Does not inherit materials, performance data or standards from Flexible RTP — these are distinct technology families. This is a configurable family per project specification; specific commercial products (model, name) are pending manufacturer confirmation. Request availability stating the required diameter, grade and service.

Availability on request — configurable family per project specification

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

OCTG — Tubing, Casing & Premium Connections

Tubing, Casing and Premium Connections for oil and gas wells, under API 5CT (Tubing: OD 48–114.3 mm, grades J55 to V140; Casing: OD 114.3–508 mm, grades J55 to V140) and manufacturer-documented premium connections (OD 114.3–177.8 mm, strength range 80–140 ksi, API 5B and manufacturer proprietary specifications). This is a configurable family per project specification; the absence of a closed SKU does not mean absence of product. Request availability stating the required diameter, grade and connection type.

Availability on request — configurable family per project specification

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

Flexible RTP

Non-metallic reinforced thermoplastic pipe (RTP), with verified technical information at line and DN/PN reference level — e.g. the oil/water transportation and injection line (HDPE/PEX/PVDF liner, industrial polyester reinforcement, DN 40–150 mm, -40°C to 90°C, 16–25 MPa depending on application). Specific commercial products (name, model) are pending manufacturer confirmation; a documented discrepancy exists between line ranges and specific DN/PN configurations which is not assumed or corrected without manufacturer clarification. This is a configurable family per project specification. Request availability stating the required diameter, pressure and service.

Availability on request — configurable family per project specification

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

Seawater Conditioning for Oilfield Injection

Seawater preparation for injection in oil-recovery operations (maintaining reservoir pressure or supporting secondary recovery), via pretreatment, ultrafiltration, nanofiltration and deoxygenation, in a compact design for space-constrained platforms. One documented design plan contemplates a 410 m³/h intake flow and a 240 m³/h output of conditioned water, with residual dissolved oxygen ≤0.05 mg/L — this figure corresponds to an engineering design plan, not an installed or operating plant; each project defines its own flow rate and conditions. This solution exclusively treats seawater; it must not be confused with produced or congenital water treatment.

Availability on request — flow rate and configuration defined per project

Sale · Supply · Distribution

Opens this opportunity's page in a new tab

Produced and Congenital Water Treatment

The water that accompanies oil and gas production requires a solution matched to its composition and the intended use after treatment. ALLIANCE coordinates this solution together with a technology provider and a Mexican integration company: the technical configuration — process, equipment and scope — is defined for each project according to flow rate, water composition and required end use. There is no single technical datasheet nor a standard model applicable to every case; ALLIANCE articulates the commercial and technical relationship between the client, the technology provider and the integrator, without being the equipment manufacturer or an exclusive representative of either party.

Availability on request — process and equipment defined per project, no standard model

Supply · Representation

Opens this opportunity's page in a new tab